Technical Reports Road pavements
This page lists technical reports of PIARC in the field of Road pavements. These publications are classified chronologically.
-
Inventory of Surface Characteristics Measuring Equipment
In 1989, the PIARC Technical Committee C1 started compiling an inventory of surface characteristics measuring equipment used throughout the world. The result is a comprehensive listing of equipment for measuring longitudinal evenness, transverse profile distresses (rutting), texture and skid resistance (tire-pavement friction) of pavements, the deformation of road surfaces. The information is presented as tables (one table per device) which composed a bilingual catalogue (English - French). [...]
-
Testing of Marginal Materials
Drafted by the PIARC Technical Committee on Testing of Road Materials, this report is a direct extension of the first PIARC publication on Marginal Materials (see page 57). The first part examines the conventional tests applied to some marginal materials of the industrial by-product type and sets out the conditions to be achieved to obtain a certain international harmonization. The second part is devoted to special tests and completes, further specifies or corrects data appearing in the first publication. [...]
-
Marginal Materials - State of the art
Three PIARC Technical Committees have devoted part of their preliminary work to the XVIIIth Congress (Brussels, 1987) to the use of marginal materials in road technology: Technical Committee on Testing of Road Materials, Technical Committee on Flexible Roads, Technical Committee on Earthworks, Drainage, Subgrade. The first part of the document concerns the use of marginal materials in earthworks and subgrade. The second part deals with the use of marginal materials in the construction of flexible [...]
-
Testing Hydraulic and Pozzolanic Binder Treated Materials
Test Specimen Dimensions, Specimen Compacting, Specimen Conservation, Determination of Mechanical Properties.
-
Testing Aggreates
Particle-size Analysis by Sieving, Los Angeles Test, Sand Equivalent, Accelerated Polishing Test, Determination of the Amount of Fines Passing 0.075 mm Mesh, Gravimetric Measurement: Absolute Density, Real Density, Bulk Density (with and without compacting), Aggregate Shape Measurement: Shape Factor with Callipers Flattening Coefficient, Sample Preparation for Testing, Frost Susceptibility, Elements for Aggregate identification, Determination of Sand Flow Coefficient, [...]